8. If you encounter problems, refer to the contact information on the back cover of this
manual or the contacts included in the Field Communicator User’s Manual.
4.5 Security seals for the meter
For the integrity of the meter metrology and to prevent tampering with the transmitter
electronics and transducer assemblies, attach security latches on the end caps and install
security wires, if required, on the Transmitter Electronics Enclosure end caps, the Bracket/
Cover cap head screws. See Section 3.6 and Sealing the unit.
Configuration
110 Gas Ultrasonic Flow Meter
To Next Page
Loading...
Need help?
General
