Emerson Daniel 3410 Series Installation Manual

1 Introduction
Topics covered in this chapter:
•
Product overview
•
Typical applications
•
Feature and benefits
•
Acronyms, abbreviations and definitions
•
Daniel MeterLink software
•
Daniel 3410 series meter design
•
Meter specifications
•
Pre-installation considerations
•
Safety
•
Daniel 3410 series certifications and approvals
•
FCC compliance
•
References
1.1 Product overview
Daniel
™
3410 Series Ultrasonic Gas Flow Meters have various configurations that meet a
broad range of customer requirements. Each meter comes fully assembled from Daniel
™
Measurement and Control, Inc.
Refer to the following documents for additional details:
• P/N 3-9000-763 Daniel MeterLink
™
Software for Gas and Liquid Ultrasonic Flow
Meters Quick Start Manual
• P/N 3-9000-761 HART
®
Field Device Specification Manual
• P/N 3-9000-769 Daniel 3410 Series Ultrasonic Gas Flow Meter Maintenance and
Troubleshooting Manual
Daniel 3415 Gas Ultrasonic Flow meter is a 4-path chordal design combined with a single-
path bounce design. This technology provides custody transfer gas measurement
combined with integrated check metering.
Model 3416 Gas Ultrasonic Flow meter is a 4-path chordal design combined with a two-
path bounce design, which provides custody and check metering in addition to a
diagnostic for pipe bottom contamination.
Model 3417 Gas Ultrasonic Flow meter is a fully redundant custody meter with two
independent 4-path chordal meters in one body.
See for advantages of Daniel 3410 Series Ultrasonic Gas Flow Meters.
Introduction
Installation manual 1

Emerson Daniel 3410 Series Specifications

General

Brand	Emerson
Model	Daniel 3410 Series
Category	Measuring Instruments
Language	English