EN Series Drives Manual
Mechanical Installation
Drive Mounting
EN Drives must be back mounted vertically on a metal surface such as a
NEMA enclosure. A minimum spacing of two inches must be maintained above
and below the EN Drive for ventilation. Additional space may be necessary for
wiring and cable connections.
6.90
(875.3) 0.41(10.4)
` Typical
JO h[!Lli!)
11'
3.00 (76.2) needed for
cable dearance
11. 20 1.
(284.5)
•
A
0.35 • • t 85
0.25 4 18,91 • (47 0)
(6.4)
Dimensions In ( ) are millimeters
M6401 F . A - ] [ Model , B ,,,. C I
EN-204 203 (74.4) , TIA Cable CMDX7 AX-CEN
All Dive
EN-208 3.43(97.1) Mader C0480XXX CMOO 1 CORO
EN-214 3.93(99.9) 2 5 (63 5) 3 5 (88 9)1 75 (44.5)
Figure 6 Drive Mounting Diagram
•
Maintain a 2.0 (50.8) clearance above
and below drive for ventilation
0 20 D,a
Typ. 4 places
1.0 (25.4) Minimum
14
To Next Page
Loading...
