11-58 • E2 RX/BX/CX I&O Manual 026-1614 Rev 4 5-JAN-2013
• Port – the port the change was made through.
• User – the user name.
• Application Name – the name of the cell that was
changed.
• Property Name – The name of the property that
was changed.
• FromValue – The value of the setpoint
• To Value – The new value of the setpoint
11.26.2 Logged Changes
A log will be appended with changes as they occur:
• Any setpoints that are directly changed by a user.
• Custom property values that are changed. These
properties are changed by the system as a result of a
user changing a value. These will be logged as
changed by the user.
• Application inputs that are set as fixed values and
changed by user.
• User Associations
• Changes in input/output pointers.
11.26.3 Unlogged Changes
There are some kinds of changes that occur that will
not have logs created for them:
• User overrides – Overrides are input/output
changes to the value outside of the setup screen or
application control.
• Real-time value on cell inputs that are connected to
other application outputs.
To Next Page
Loading...
