Emerson FB1100 - Page 66

FB1100 Flow Computer Instruction Manual
D301752X012
November 2023
52 Operation
Table 3-1. Infrared (IR) Buttons on HMI Module
Button
Mode
Use
OR
Screen Saver

Tap once to move up or down one item
through list of parameters.

Hold to stay on current parameter.
Data Entry

Tap (UP) once to move the cursor to the
previous character in the list or (DOWN) once
to move the cursor to the next character in the
list.

Hold (UP) or (DOWN) to scroll more quickly
through the character list.
Idle Mode
Hold to wake the display (if screen is off)
Screen Saver
Log out (if logged on)
Data Entry

Tap once to move the cursor to the left.

Hold to perform action shown on screen (such
as “Hold to Accept”)
Data Entry

Tap once to move the cursor to the right.

Hold to perform action shown on screen (such
as “Hold to Cancel”)
Symbol(s) representing the status of a value may appear in the upper right of the display
next to the description. Multiple symbols may display. If there are no data quality issues,
no symbols display.
Table 3-2. Symbols on Display
Symbol
Meaning
Alarm: The parameter value shown is in an alarm state (such as High Alarm,
Low Alarm, etc.).
Override: The parameter value shown is in override mode (that is, a user-
entered fixed value).
Fault: The parameter value shown is somehow invalid.
Unverified: For parameter values that require additional validation (beyond
simple database min/max range checking), the firmware has not yet
validated the parameter value shown.