Emerson Keystone EPI2 63 - Decommissioning; Disposal and Recycling

October 2020
Installation, Operation and Maintenance Manual
MAN-10-04-100-0711-EN Rev. 0
44
Decommissioning
Section 8: Decommissioning
Section 8: Decommissioning
8.1 Disposal and Recycling
At the end of the life of Keystone EPI2, the device must be disassembled. Do not dump
non-biodegradable products, lubricants and non-ferrous materials (rubber, PVC, resins etc.)
into the environment.
Dispose of all such materials as indicated in the following table:
Table 8.
!
WARNING
Do not re-use parts or components which appear to be in good condition after they have
been checked or replaced by qualied personnel and declared unsuitable for use.
NOTE
In all cases check local authority regulation before disposal.
Subject Hazardous Recyclable Disposal
Electrical and
electronic equipment
Yes Yes Use specialist recyclers
Glass No Yes Use specialist recyclers
Metals No Yes Use licensed recyclers
Plastics No Yes Use specialist recyclers
Rubber
(seals and O-rings)
Yes No
Will require special treatment before
disposal, use specialist waste
disposal companies
Oil and grease Yes Yes
Will require special treatment before
disposal, use specialist recyclers or waste
disposal companies
Batteries Yes Yes
Will require special treatment before
disposal, use specialist recyclers or waste
disposal companies