October 2020
Installation, Operation and Maintenance Manual
MAN-10-04-100-0711-EN Rev. 0
58
Parts List and Drawings
Section 9: Parts List and Drawings
Table 15. Keystone EPI2 Model 2000 (Actuator) - General Assembly
* Indicates recommended spare parts
Pos. Description Quantity
1 Nut UNI 5588-M6 2
2 Eccentric 1
3 Planocentric gear 2
4 Spacer 1
5 Ball bearing type 6305 2
6 Ball bearing type 16002 1
7 Roller bearing type NJ202ECP 1
8 ESH screw UNI 5931-M6x8 1
9 HSHC screw UNI 5931-M4x14 7
10 HSHC screw UNI 5931-M6x25 4
11 HSHC screw UNI 5931-M8x25 A4-70 2
12 HSSC screw UNI 5933-M6x20 1
13 HSSC screw UNI 5933-M4x10 1
14 HSSC screw UNI 5933-M5x12 3
15 Cover assembly 1
16 Drive and control assembly 1
17 Handwheel assembly 1
18 Housing 1
19 Output drive assembly 1
20 Terminal block 1
21 Terminal cover gasket 1*
22 Worm shaft ange 1
23 Anti-loosening washer UNI 8842-J6 2
24 Bushing 1
25 Cover gasket 1*
26 Dowel pin UNI EN 22338 1
27 Earth stud 1
28 Fixed anulus 1
29 Hex head screw UNI EN 24017-M16x30 2
30 Indicator 1
31 Indicator shaft 1
32 Manual worm shaft 1
33 Motor pinion 1
34 O-ring Di=13.94/W=2.62 1*
35 O-ring Di=25.12/W=1.78 1*
36 O-ring Di=6.07/W=1.78 1*
37 O-ring Di=82.22/W=2.62 1*
38 Plug 1
39 Position label 1
40 Power clamps protection 1
41 Ring 1
42 Ring for pins alignement 1
43 Seal washer 16.3 2
44 Terminal board gasket 1*
45 Washer 1
46 Wheel 1
47 Terminal block cover 1
48 HSHC screw UNI 5931-M6x18 4
To Next Page
Loading...
