6 Micro Motion Series 1000 and Series 2000 Transmitters
Before You Begin
1.7 Pre-configuration worksheet
Note: Not all options are available for all transmitters.
Item Configuration data
Sensor type
T- S e r i e s
Other
Transmitter model number
______________________________________
Transmitter model
1500
1700
2500
2700
Installation type
Integral
4-wire remote
9-wire remote
Remote core processor with remote transmitter
Outputs option board
Analog (AN)
Intrinsically safe (IS)
Configurable input/outputs (CIO)
Transmitter software
version
______________________________________
Core processor software
version
______________________________________
Outputs Terminals 1 & 2
or
Terminals 21 & 22 or
Channel A
Milliamp (no options)
Used for HART/Bell202 digital communications
Terminals 3 & 4
or
Terminals 23 & 24 or
Channel B
Milliamp
Frequency
Discrete output
Internal power
External power
Terminals 5 & 6
or
Terminals 31 & 32 or
Channel C
Milliamp
Frequency
RS-485
Discrete output
Discrete input
Internal power
External power
Process variable or
assignment
Terminals 1 & 2 or
Terminals 21 & 22 or
Channel A ______________________________________
Terminals 3 & 4 or
Terminals 23 & 24 or
Channel B ______________________________________
Terminals 5 & 6
or
Terminals 31 & 32 or
Channel C ______________________________________
Measurement units Mass flow
______________________________________
Volume flow
______________________________________
Density
______________________________________
Pressure
______________________________________
Temperature
______________________________________
To Next Page
Loading...
