Configuration and Use Manual 27
Connecting with ProLink II or Pocket ProLink Software
Using the Display Using the CommunicatorUsing ProLink IIBefore You Begin
5. Click Connect.
6. If an error message appears:
a. Ensure that you are using the correct COM port.
b. Check all the wiring between the PC and the transmitter.
c. Increase or decrease the resistance.
3.6 ProLink II language
ProLink II can be configured for several different languages. To configure the ProLink II language,
choose
Tools > Options.
In this manual, English is used as the ProLink II language.
To Next Page
Loading...
