Configuration and Use Manual 181
Diagrams Model 2500 CIOModel 1500 ANDefaults
Appendix C
Menu Flowcharts – Model 1500 AN Transmitters
C.1 Overview
This appendix provides the following menu flowcharts for the Model 1500 AN transmitter:
• ProLink II menus
- Main menu – Figure C-1
- Configuration menu – Figures C-2 through C-4
• Communicator 375 menus
- Process variables menu – Figure C-5
- Diagnostics/service menu – Figure C-6
- Basic setup menu – Figure C-7
- Detailed setup menu – Figures C-8 through C-10
C.2 Model 1500 output board
The Model 1500 transmitter is designed as an analog transmitter, i.e., a transmitter with the analog
outputs option board. However, for technical reasons it is built on the CIO outputs option board.
Accordingly, when you select a menu option that displays the outputs option board, the CIO board is
shown. This is normal, and does not affect actual transmitter outputs or operation.
C.3 Version information
These menus flowcharts are based on:
• Transmitter software rev5.0
• Enhanced core processor software v3.2
• ProLink II v2.5
• 375 Field Communicator device rev 5, DD rev 1
Menus may vary slightly for different versions of these components.
To Next Page
Loading...
Need help?
General
