Configuration and Use Manual 167
Default Values and Ranges
Diagrams Model 2500 CIOModel 1500 ANDefaults
Display Variable 1 Mass flow rate
Variable 2 Mass totalizer
Variable 3 Volume flow rate
Variable 4 Volume totalizer
Variable 5 Density
Variable 6 Temperature
Variable 7–15 None
Update period 200 millisec 100–10,000
millisec
Display totalizer reset Disabled
Display auto scroll Disabled
Display backlight Enabled
Display variable precision • 2 decimal places
for temperature
process variables
• 4 decimal places
for all other
process variables
0–5
Display offline menu Enabled
Display offline password Disabled
Display alarm screen
password
Disabled
Display alarm menu Enabled
Display acknowledge all
alarms
Enabled
Display LED blinking Enabled
Display password 1234 0000–9999
Auto scroll rate 10 sec
Display totalizer start/stop Disabled
Digital comm Fault setting None
HART address 0
Loop current mode Enabled
Modbus address 1
Write protection Disabled
Table A-1 Transmitter default values and ranges continued
Type Setting Default Range Comments
To Next Page
Loading...
