Figure 5-3: M12-terminated cables to the configuration I/O
Table 5-1: Cable end I/O pinouts
Pin
identification
Wire color Outputs on terminal Signal name
Pin 1 Brown Pin3 VDC +
Pin 2 White Pin 1 Channel B +
Pin 3 Blue Pin 4 VDC -
Pin 4 Black Pin 2 Channel B -
2. Attach the other cable end using the pinouts described in Table 5-2.
Note
For M12 power supply pinouts, only pins 1 and 3 are used.
Table 5-2: M12 power supply pinouts
Pin
identification
Wire color Outputs on terminal Signal name
Pin 1 Brown Pin3 VDC +
Pin 2 White Pin 1 Channel B +
Pin 3 Blue Pin 4 VDC -
Pin 4 Black Pin 2 Channel B -
Power supply wiring Installation Manual
March 2022 00825-0100-1600
28 Micro Motion 1600 Ethernet Transmitters
To Next Page
Loading...
