5
Reference Manual
00809-0300-4410, Rev BA
Configuration
January 2018
Configuration
Table 2-1. Device Revisions and Files
Identify device Find device driver files Review instructions
Review
functionality
Software
release
date
NAMUR
hardware
revision
(1)
NAMUR
software
revision
(1)
1. NAMUR revision is located on the hardware tag of the device. Differences in level 3 changes, signified above by xx, represent minor product changes as defined per
NE53. Compatibility and functionality are preserved and product can be used interchangeably.
HART
software
revision
(2)
2. HART software revision can be read using a HART capable configuration tool. Value shown is minimum revision that could correspond to NAMUR revisions.
HART
universal
revision
Device
revision
(3)
3. Device driver file names use device and DD revision (e.g. 10_01). HART Protocol is designed to enable legacy device driver revisions to continue to communicate with
new HART devices. To access new functionality, the new device driver must be downloaded. It is recommended to download new device driver files to ensure full
functionality.
Manual document
number
Changes to
software
(4)
4. HART Revision 5 and 7 selectable, Local Operator Interface (LOI), scaled variable, configurable alarms, expanded engineering units. Updated electronics hardware
design. Intrinsically Safe temperature classification change.
June
2016
1.1.xx 1.0.xx 03 7 10
00809-0400-4101
See footnote 4 for
list of changes.
5 9
To Next Page
Loading...
