3. Enter the required emulation address in holding registers 900-909,Value field.
Valid Sakura MDP addresses are 0-255, and valid Sakura V1 addresses are 0-99.
(4)
Tip
In the Tank Database tab, set the Modbus address to the same as the chosen
Sakura address for each device.
(4)
Emulation address is by default set to “65535” for tank positions that are not in use.
Manual Supplement Configuration
00809-0800-2410 August2023
Emerson.com/Rosemount 17
To Next Page
Loading...
