Emerson Rosemount 3144P - A.5 Ordering Information

Specifications and Reference Data
April 2017
Reference Manual
00809-0100-4021, Rev JA
Specifications and Reference Data
194
A.5 Ordering information
Table A-4. Rosemount 3144P Temperature Transmitter Ordering Information
The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to
additional delivery lead time.
Model Product description
3144P Temperature transmitter
Housing style
Material Conduit entry size
D1 Field mount housing, dual-compartment housing Aluminum
1
/2–14-in. NPT
★
D2 Field mount housing, dual-compartment housing Aluminum M20  1.5 (CM20)
★
D3 Field mount housing, dual-compartment housing Aluminum PG 13.5 (PG11)
★
D4 Field mount housing, dual-compartment housing Aluminum JIS G
1
/2
★
D5 Field mount housing, dual-compartment housing Stainless steel
1
/2–14-in. NPT
★
D6 Field mount housing, dual-compartment housing Stainless steel M20  1.5 (CM20)
★
D7 Field mount housing, dual-compartment housing Stainless steel PG 13.5 (PG11)
★
D8 Field mount housing, dual-compartment housing Stainless steel JIS G
1
/2
★
Transmitter output
A 4—20 mA with digital signal based on HART Protocol
★
F FOUNDATION Fieldbus digital signal (includes three AI function block and backup link active scheduler)
★
Measurement configuration
1 Single-sensor input
★
2 Dual-sensor input
★
Product certificates
NA No Approval
★
E5 FM Explosion-proof, Dust Ignition-Proof, and Non-incendive approval
★
I5
(1)
FM Intrinsically Safe and Non-incendive (includes standard IS and FISCO for Fieldbus units)
★
K5
(1)
FM IS, Non-incendive and Explosion-proof combo (includes standard IS and FISCO for Fieldbus units)
★
KB
(1)
FM and CSA IS, Explosion-proof, and Non-incendive combo (includes standard IS and FISCO for FF units)
★
I6
(1)
CSA Intrinsically Safe/FISCO and Division 2 (includes standard IS and FISCO for Fieldbus units)
★
K6
(1)
CSA IS, FISCO Division 2 and Explosion-proof combo (includes standard IS, FISCO for Fieldbus units)
★
E1 ATEX Flameproof approval
★
N1 ATEX type n approval
★
I1
(1)
ATEX intrinsic safety approval (includes standard IS and FISCO for Fieldbus units)
★
K1
(1)
ATEX IS, Flameproof, Dust Ignition-Proof and type n combo (includes standard IS and FISCO for Fieldbus units)
★
ND ATEX Dust Ignition-Proof approval
★
KA
(1)
ATEX/CSA intrinsic safety, Explosion-proof combo (includes standard IS and FISCO for Fieldbus units)
★
E7 IECEx Flameproof approval
★
N7 IECEx Type 'n' approval
★