Emerson Rosemount 3144P - B.1 European Directive Information

Product Certifications
Reference Manual
00809-0100-4021, Rev JA
Product Certifications
April 2017
203
Appendix B Product Certifications
Rev 1.15
European Directive Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 203
Ordinary Location Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 203
Installation drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 210
B.1 European Directive
Information
A copy of the EU Declaration of Conformity can be found at
the end of the Quick Start Guide. The most recent revision
of the EU Declaration of Conformity can be found at
Emerson.com/Rosemount
.
B.2 Ordinary Location
Certification
As standard, the transmitter has been examined and tested
to determine that the design meets the basic electrical,
mechanical, and fire protection requirements by a
nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health
Administration (OSHA).
B.3 North America
E5 FM Explosionproof, Dust-Ignitionproof, and
Nonincendive
Certificate: FM16US0202X
Standards: FM Class 3600: 2011, FM Class 3611: 2004,
FM Class 3615: 2006, FM Class 3810: 2005,
NEMA-250: 1991, ANSI/ISA 60079-0:
2009, ANSI/ISA 60079-11: 2009
Markings: XP CL I, DIV 1, GP A, B, C, D;
T5(–50 °C ≤ T
a
≤ +85 °C); DIP CL II/III, DIV 1,
GP E, F, G; T5(–50 °C ≤ T
a
≤ +75 °C);
T6(–50 °C ≤ T
a
≤ +60 °C); when installed
per Rosemount drawing 03144-0320; NI
CL I, DIV 2, GP A, B, C, D; T5(–60 °C ≤ T
a
≤
+75 °C); T6(–60 °C ≤ T
a
≤ +50 °C); when
installed per Rosemount drawing
03144-0321, 03144-5075
I5 FM Intrinsic Safety and Nonincendive
Certificate: FM16US0202X
Standards: FM Class 3600: 2011, FM Class 3610: 2010,
FM Class 3611: 2004, FM Class 3810: 2005,
NEMA-250: 1991, ANSI/ISA 60079-0:
2009, ANSI/ISA 60079-11: 2009
Markings: IS CL I/II/III, DIV 1, GP A, B, C, D, E, F, G;
T4(–60 °C ≤ T
a
≤ +60 °C); IS [Entity] CL I,
Zone 0, AEx ia IIC T4(–60 °C ≤ T
a
≤ +60 °C);
NI CL I, DIV 2, GP A, B, C, D;
T5(–60 °C ≤ T
a
≤ +75 °C);
T6(–60 °C ≤ T
a
≤ +50 °C); when installed
per Rosemount drawing 03144-0321,
03144-5075
I6 CSA Intrinsic Safety and Division 2
Certificate: 1242650
Standards: CAN/CSA C22.2 No. 0-M91 (R2001),
CAN/CSA-C22.2 No. 94-M91, CSA Std
C22.2 No. 142-M1987, CAN/CSA-C22.2
No. 157-92, CSA Std C22.2 No.
213-M1987
Markings: Intrinsically Safe for Class I Groups A, B, C,
D; Class II, Groups E, F, G; Class III;
[HART only zone markings]: Intrinsically
Safe for Class I Zone 0 Group IIC;
T4(–50 °C ≤ T
a
≤ +60 °C); Type 4X; Suitable
for Class I, Div. 2, Groups A, B, C, D;
[HART only zone markings]: Suitable for
Class I Zone 2 Group IIC;
T6(–60 °C ≤ T
a
≤ +60 °C);
T5(–60 °C ≤ T
a
≤ +85 °C); when installed
per Rosemount drawing 03144-5076
K6 CSA Explosionproof, Intrinsic Safety and Division 2
Certificate: 1242650
Standards: CAN/CSA C22.2 No. 0-M91 (R2001), CSA
Std C22.2 No. 30-M1986; CAN/CSA-C22.2
No. 94-M91, CSA Std C22.2 No.
142-M1987, CAN/CSA-C22.2 No. 157-92,
CSA Std C22.2 No. 213-M1987