EMKO EAOM-19 - Oil Sensor Selection (P27); TECHNICIAN PASSWORD (Ptps)

30
4.5.16OilSensorSelection( )P27
Thisparameterdeterminethefunctionofoilsensorinput(Pin7);
1:Oilpressuresensor.
fitisselectedasoilpressuresensor(1),theoil
pressureparameter(P15.3)oftheenginestartedsignalswillbefunctional.
0:Oillevelsensor.
Ifitisselectedasoillevelsensor(0),theoilpressureparameter(P15.3)oftheengine
startedsignalswillnotbefunctional.Buti
4.5.17EngineRunningTime(P28)
Theusercanchangetheenginerunningtimevaluebyusingthisparameter.
i
To prevent to changing unit program parameters by unauthorised personel
don’t allow to the learning operator and technician passwords by the others. In
case of this situation, change passwords immediately.
4.5.18OperatorPassword(PoPS)
UsethisoptiontochangetheOperatorpassword. Thispasswordallowsaccesstoprogram
parametersP00toP09andPoPS.
4.5.19TechnicianPassword(PtPS)
Usethisoptiontochangethe Technicianpassword.Itallowsaccesstoprogramparameters
P00toPtPS.