EMKO EAOM-210 FLJ - Section 5 Unit Operation; 5.1 Controls and Indicators

EAOM-210 FLJ.eng / ver 0.0
Pages 110 / 132
Section 5 Operation
5.1 Controls and Indicators
5.1.1 LCD Display Description:
Mains & Load Page
MAINS & LOAD
L12: 380Vac I1: 126A
Fq:50.0Hz
AUTO
L23: 380Vac I2: 126A
L31: 380Vac I3: 126A
IT: 378A
IEA: 63A
CRANKNG ATTEMP
OVER SPEED PREALARM!
PROG
Engine Status
Measurement values
Error Messages
Current page name
Working mode
128x64 Dot-matrix LCD display. It consist of 13 main working pages (screens). Every screen
has got 8 lines. Seventh and eighth lines are common in all pages. Use the and
buttons to select which working page (screen) is to be displayed. For details see Example-
1: Changing page with Next and Previous buttons.
There are 13 working pages in the LCD display, as follows;
1- Mains & Load Page:
MAINS & LOAD
L12: 380Vac I1: 126A
Fq:50.0Hz
AUTO
L23: 380Vac I2: 126A
L31: 380Vac I3: 126A
IT: 378A
IEA: 63A
CRANKNG ATTEMP
OVER SPEED PREALARM!
• L12 - Mains voltage L1-L2
• L23 - Mains voltage L2-L3
• L31 - Mains voltage L3-L1
• Fq - Mains frequency
• I1 - Load current L1
• I2 - Load current L2
• I3 - Load current L3
• IT – Vectorel total current
• IEA - Earth current
• AUTO - Working mode
• CRANKNG ATTEMP - Engine cranking process is executing. (Engine status)