EMKO EAOM-210 FLJ - Electronic Engines (Ecus) and EAOM-210 FLJ Unit

EAOM-210 FLJ.eng / ver 0.0
Pages 16 / 132
Electronic Engines (ECUs) and EAOM-210FLJ unit
Volvo EMS2:
Fitted to Volvo Penta engine types : TAD734, TAD940, TAD941, TAD1640, TAD1641,
TAD1642
EAOM-210FLJ
Terminal
Volvo EMS2
Connector
Terminal
Notes
Conf. Output-3 6 Please select the relevant engine and
configurable output 3 to be “ECU
STOP”
Conf. Output-2 5 Please select the relevant engine and
configurable output 2 to be “ECU
POWER”
3 DC Supply negative
4 DC Supply positive
CAN H 1 (High)
J1939 + Use only screened 120Ω
impedance cable approved specifically
for use in CanBus applications.
CAN L 2 (Low)
J1939 – Use only screened 120Ω
impedance cable approved specifically
for use in CanBus applications.
Volvo EDC4:
Fitted to Volvo Penta engine types : TD520, TAD520 (optional), TD720, TAD720 (optional),
TAD721, TAD722
EAOM-210FLJ
Terminal
Volvo EDC4
Connector
Terminal
Notes
Start (crank) Output Connects directly to engine starter
solenoid.
Fuel Output Use to control a 30A
external slave relay to
supply DC battery power
to pin 14. Fuse at 16
amps.
1 Connects directly to battery negative
CAN H 12 (High)
J1939 + Use only screened 120Ω
impedance cable approved specifically
for use in CanBus applications.
CAN L 13 (Low)
J1939 – Use only screened 120Ω
impedance cable approved specifically
for use in CanBus applications.