EMKO EAOM-210 FLJ - Page 93

EAOM-210 FLJ.eng / ver 0.0
Pages 93 / 132
WORK.START TIME THU 12.20 The working function is every Thursday started
at 12.20 o'clock (if it is enabled)
WORK.PERIOD ON FRI. (dis)0 The working function is Fridays disabled.
(1440) The working function is enabled whole day.
(120) The working function is every Friday enabled for 120
minutes.
WORK.START TIME FRI 12.20 The working function is every Friday started
at 12.20 o'clock (if it is enabled)
WORK.PERIOD ON SAT. (dis)0 The working function is Saturdays disabled.
(1440) The working function is enabled whole day.
(120) The working function is every Saturday enabled for 120
minutes.
WORK.START TIME SAT 12.20 The working function is every Saturday started
at 12.20 o'clock (If it is enabled)
WORK.PERIOD ON SUN. (dis)0 The working function is Sundays disabled.
(1440) The working function is enabled whole day.
(120) The working function is every Sunday enabled for 120
minutes.
WORK.START TIME SUN 12.20 The working function is every Sunday started
at 12.20 o'clock (If it is enabled)
Please enter the day of the week for Exercise Function. Example:
EXER.WORKING PERIOD (dis)0 The exercise function is disabled.
(10) The exercise function is enabled for 10 minutes.
EXER.WR.DAY OF WEEK 1=Monday, 2=Tuesday, 3=Wednesday, 4=Thursday,
5=Friday, 6=Saturday, 7=Sunday.
EXER.WORK.START TIM 12.20 The exercise function is started at 12.20 o'clock
(If it is enabled)
(DATE SETUP PAGE) DATE SETUP page
YEAR YEAR
0 - 99
MONTH MONTH
1 - 12
DATE DATE
1 - 31
DAY DAY
1 - 7
HOUR HOUR
0 - 23
MINUTE MIN
0 - 59
SECOND SEC
0 - 59
(PASSWORD PAGE) PASSWORD page
OPERATOR PASSWORD OPERATOR PASSWORD
0 - 9999 0
TECHNICIAN PASSWORD TECHNICIAN PASSWORD
0 - 9999 0
BACK FACTRY.DEFAULT Back Factory Default
No/Yes No
OPERATOR PASSWORD
Use this option to change the Operator password. This password allows access to operator
parameters section.
TECHNICIAN PASSWORD
Use this option to change the Technician password. It allows access to both operator and
technician parameters section.
BACK FACTORY DEFAULT
If this parameter is selected as “Yes”, the unit’s parameters back to factory defaults. After
this parameter is reset automatically to “No”.