CG Drives & Automation 01-5958-01r0
1 Inside the Box
Please check the delivery. Despite the fact that all products from CG Drives &
Automation are carefully inspected and packed, transport damage may occur:
• Your shipment should contain the Emotron M20 shaft power monitor,
a current transformer, 2x terminal covers (option*) and this instruction
manual.
• Check carefully that the equipment ordered complies with the motor’s input
voltage and that the current transformer rating is as stated on the delivery
packaging.
• Check that the contents have not been damaged during shipping.
• If something is missing, or has been damaged, contact the supplier as well as
the forwarding agent within 48 hours of receipt.
NOTE: If in doubt contact your supplier before installing or commissioning
the product.
To Next Page
Loading...
Need help?
General
