CG Drives & Automation 01-5958-01r0
8Programming
8.1 Set measurement unit, kW or HP
8.1.1 Selecting the unit of measurement
The unit of measurement can be set to kilowatts or horsepower both as absolute
or relative values. This setting is valid for the alarm levels, rated motor power
and the actual load read-out in window 01.
* Measured shaft power as % of rated power.
Measurement
unit
Read-out
load
window 01
Rated power
window 41
Alarm levels
windows
11, 12, 13, 14
Kilowatt relative value (def.)* % kW %
Horsepower absolute value HP HP HP
Horsepower relative value* % HP %
Kilowatt absolute value kW kW kW
CAUTION!
In order to avoid personal injury, make sure that all safety measures have
been taken before switching on the supply voltage and starting the motor/
machine.
To Next Page
Loading...
