What causes seam gather or pucker on my Empisal EES10?
Seam gather or pucker on your Empisal Sewing Machine can occur if the needle is too thick for the fabric, so select a finer needle. Readjust the stitch length if it is adjusted wrong. If the thread tension is too tight, loosen it.
Why are the patterns distorted on my Empisal EES10 Sewing Machine?
If the patterns are distorted on your Empisal Sewing Machine, ensure you are using the correct presser foot. Also, check if the needle thread tension is too tight and loosen it.
Connects power line cord to machine and outlet, then turns on the main power switch.
Step-by-step guide for winding thread onto the bobbin using the winding spindle and tension discs.
Explains beep sounds for correct/incorrect operation and error messages for trouble, referencing troubleshooting.
Procedure for cleaning the exterior of the sewing machine using mild detergent and water.
General| Type | Electronic |
|---|---|
| Stitches | 10 |
| Stitch Length Control | Yes |
| Stitch Width Control | Yes |
| Stitch Length | 4mm |
| Stitch Width | 5mm |
| Presser Foot | Snap-On |
| Included Feet | All-purpose foot, zipper foot, buttonhole foot |
| Power Requirements | 220-240V |
To Next Page
