Endace DAG 9.2X2 - Boot Leds

EDM01-36v10 DAG_9.2X2_Card_User_Guide - Installation
12 ©2010 - 2012 Endace Technology Ltd. Confidential - Version 10 - May 2012
Boot LEDs
The following tables describe the Boot LED configurations of the DAG 9.2X2. The Boot LED's are to the
right of the Boot Jumpers.
Boot LED numbering:
LED Color
3
Green
2
Green
1
Green
0
Red
Notes:
• If the blue 'FPGA programmed' LED (on the front of the DAG card) is off or flashing - contact Endace
Support.
• If the red Boot LED is flashing, contact Endace Support.