Endace DAG 9.2X2 - Introduction; The Purpose of this User Guide

EDM01-36v10 DAG_9.2X2_Card_User_Guide - Introduction
©2010 - 2012 Endace Technology Ltd. Confidential - Version 10 - May 2012 1
Introduction
The Purpose of this User Guide
The purpose of this user guide is to provide you with an understanding of the Endace DAG 9.2X2 card
architecture, functionality and to guide you through the following:
• Installing the card software.
• Installing the firmware.
• Installing the physical card.
• Configuring the card for your specific network requirements.
• Running a data capture session.
• Synchronizing clock time.
• Data formats.
You can also find additional information relating to functions and features of the DAG 9.2X2 card in the
following documents which are available from the Support section of the Endace website at
http://www.endace.com:
• EDM04-01 DAG Software Installation Guide
•
EDM04-03 dagflood User Manual
•
EDM04-04 dagfwddemo User Guide
•
EDM04-06 Daggen User Guide
•
EDM04-19 DAG Programming Guide
•
EDM04-21 Libpcap and Third party applications
•
EDM04-25 Counters and Statistics API
•
EDM04-30 dagfilter-loader Software Guide
•
EDM04-31 Enhanced Packet Processing v2
•
EDM04-32 dagmem Software Guide
•
EDM04-33 dag_irigb Software Guide
•
EDM04-34 Configuration & Status API Overview
•
EDM04-37 Windows DAG Software Installation Guide
•
EDM05-01 Time Distribution Server User Guide
•
EDM05-02 TDS 24 Installation Guide
•
EDM11-01 ERF Types
•
PN01-13 DAG Card Quick Start Guide
This user guide and the following installation guides are also available in PDF format on the installation
CD shipped with your DAG 9.2X2 card.
•
EDM04-01 DAG Software Installation Guide
•
EDM04-37 Windows DAG Software Installation Guide