Endace DAG 9.2X2 - Daginf; Dagdetect

EDM01-36v10 DAG_9.2X2_Card_User_Guide - Configuring the DAG card
18 ©2010 - 2012 Endace Technology Ltd. Confidential - Version 10 - May 2012
daginf
daginf is the information utility for DAG cards. By default daginf displays summary information about
all DAG cards installed in the system. The available options in
daginf are as follows:
Option Description
-d,--device <device>
The DAG device to use. Default is d0.
-h,--help
Displays the MAN pages help for this tool.
-v,--verbose
Sets the verbosity level of the displayed information. 0 (basic) to 3 (full).
-V,--version
Display version number of daginf and of the installed DAG software.
The following is an example daginf output for the DAG 9.2X2:
Linux Windows
id 1
model DAG 9.2X2
device 0x920e
board rev 2
phy addr 0xbd400000
buf size 33554432 (32MB)
iom size 65536 (64kB)
bus addr 0000:07:00.0
Memory at node 0: 8192 pages (32MB)
copro Built-in
rxstreams 32
txstreams 1
id 1
model DAG 9.2X2
device 0x920e
board rev 3
bus addr 0x00000005205d9000
buf size 1073741824 (1024MB)
iom size 65536 (64kB)
mem NUMA node 1
copro Built-in
rxstreams 32
txstreams 1
Note:
• Depending on the installed operating system, some options do not display.
• The "mem NUMA node" will be displayed if the system is able to determine the NUMA node for the
stream buffer.
dagdetect
dagdetect displays the currently installed DAG cards and associated details.
This includes the following details:
• current device number on this system.
• the number of ports on this DAG card.
• the card code specific to this DAG card.
• the DAG card type and specific board revision.
Option Description
-c,--count
Displays the number of installed DAG cards in the system.
-d,--device
<device>
DAG device to use.
-h,--help, -
?,--usage
Displays the help associated with this software.
-i,--ifaces
Displays the number of physical interfaces on the specified DAG card.
-n,--name
Displays the name of a specified DAG card.
-p,--path
Displays the name of a specified DAG card in a form suitable for use as a filesystem path
(i.e. no whitespace). Implies '--name'.
-v,--verbose
Increase verbosity.
-V,--version
Display version information.
Note:
Dagdetect runs automatically each time the WinDAG Command Prompt window opens.