Endace DAG 9.2X2 - Hash Load Balancer; Lan; Laser;Nolaser; Lock;Nolock

To Next Page

To Previous Page

EDM01-36v10 DAG_9.2X2_Card_User_Guide - Configuring the DAG card

Hash Load Balancer

Hash Load Balancing configuration. Each stream is allocated a percentage of incoming traffic.

Example

hat=x1-x2:x3-x4:..

Note:

For further details, refer to

EDM04-31 Enhanced Packet Processing v2

lan

Set the DAG card into LAN receive mode.

Example

dagconfig lan

Note:

10G and lan may be used interchangeably.

laser/nolaser

Enables/disables the transmit laser for the optical transceivers.

Example

dagconfig laser

dagconfig nolaser

lock/nolock

Read only. Indicates that the card is receiving a signal at the appropriate frequency (lock), or there is no

signal being received (

nolock).

master/slave

Defines whether the data transmitted is clocked with the recovered clock from the input (Slave) or if it

uses the synthesized reference clock on the card (Master).