Ender 2 Pro - Loading Filament into Extruder; Feeding Filament and Tips

17
提示
17. Load Filament 装料
When target temperature is reached, hold the extruding clamp by hand and insert filament into the small hole of the extruder until the
nozzle position. When filaments flow out of the nozzle, meaning that the filaments have been loaded.
当温度达到目标温度时，用手捏住挤出夹，将耗材插入挤出机小孔直至喷嘴位置，看到喷嘴处有耗材流出即表示耗材已经装载完成。