Endress+Hauser Analytik Jena Multi X 2500 - Layout of the Multi X 2500; Electronic Components; Fig. 1 Front View (with Open Doors)

Function and layout of the multi X 2500 multi X 2500
18
3.4 Layout of the multi X 2500
The basic device of the multi X 2500 comprises the following components:
 Electronics/internal device control
 Gas supply with gas box
 Combustion system
 Measurement gas drying (standard version)
 Measuring gas transfer
All components of the basic device which are operated or serviced by the user can be
reached via the front doors. It is possible to unhinge and reinsert the front doors to
allow for better access to the device interior. The mains connection, the gas terminals
and the interface for the system components are located on the rear of the device.
Fig. 1 Front view (with open doors)
1 Furnace
2
Knob for tilting the furnace
3
Fan
4
Control electronics cover
5 Slots
6
Tilt device furnace
7
Collection tray with sulfuric acid container
(vertical) and plug
3.4.1 Electronic components
A green LED is fitted to the left-hand door of the multi X 2500. After loading the
multiWin software, the LED illuminates to indicate the operational readiness of the
basic device.
LED display