multi X 2500 Basic information
7
1 Basic information
1.1 User manual notes
The user manual informs about the design and function of the multi X 2500 and
provides the necessary know-how for the safe handling of the device and its
components. Furthermore, the user manual includes information on the maintenance
and servicing of the device as well as hints on potential causes for malfunctions and
their correction.
Instructions for actions which occur in chronological order are numbered and
combined in action units.
Warnings are indicated by warning triangles and a signal word. The type, source and
consequences of the danger are stated together with notes on preventing the danger.
The elements of the control and analysis program are indicated as follows:
Program terms are identified with small caps (e.g., the menu F
ILE).
Buttons are shown by square brackets (e.g. [OK])
Menu items are separated by arrows (e.g., F
ILE OPEN).
These instructions are aimed at qualified specialist users with knowledge of the
analysis of sum parameters. The instructions are limited to describing the functionality
of multi X 2500 and its accessories.
For the safe operation of the multi X 2500, knowledge of the operating instructions of
the control and analysis software "multiWin" is also required. Basic knowledge of
working with a computer is required. When using additional accessories, such as the
automatic boat feeder ABD, the autosampler autoX 112 or the TOC module, the user
must observe the respective operating instructions for the individual accessories.
The user manual uses the following symbols and signal words to indicate hazards or
instructions. The warnings are always placed before an action.
WARNING
Indicates a potentially hazardous situation which might cause death or very serious
inj
uries (deformities).
CAUTION
Indicates a potentially hazardous situation which might cause light or minor injuries.
NOTICE
Provides information on potential material or environmental damage.
To Next Page
Loading...
Need help?
General
