Installation and commissioning multi X 2500
44
4.3 Gas supply
The operator is responsible for the gas supply and the corresponding connections and
pressure reducers.
The connection hoses with outer diameter 6 mm and inner diameter 4 mm are
included with the delivery. The length is 2 m. If other lengths are preferred, please
contact the Analytik Jena customer service. Required gases, see section "Technical
data", p. 122 ff.
4.4 Space requirement and device layout
The space requirements are based on the system modules required for the measuring
task. In addition to that, the setup requires space for a PC, a monitor and a printer.
Dimensions (width x height x depth) in cm
Basic device multi X 2500 51 x 47 x 56
Cl module or TOC module (each) 30 x 47 x 56
autoX 36:
autoX 36d:
14.5 x 6.5 x 24
14.5 x 18 x 24
autoX 112: 51 x 50 x 40
ABD 52 x 21 x 50
Fig. 40 Vertical operating mode with autoX 36d
To Next Page
Loading...
