Endress+Hauser Analytik Jena Multi X 2500 - Fig. 9 Gas Connections on the Open Combustion Tube (Vertical Operating Mode); Fig. 10 Connections on the Multi-Purpose Combustion Tube in Horizontal Mode

multi X 2500 Function and layout of the multi X 2500
23
Fig. 9 Gas connections on the open combustion tube (vertical operating mode)
1 Sulfuric acid container (vertical) with plug
2
Spherical joint adapter with hose for connecting
the chlorine module
3
Gas outlet (open combustion tube)
4 Oxygen sluice
5
O
2
connection – hose 3
(open combustion tube)
The multi-purpose combustion tube requires oxygen as the combustion gas and argon
as the carrier gas. The composition of the gas mixture for optimum gas digestion is
controlled via the flow management system (FMS).
Fig. 10 Connections on the multi-purpose combustion tube in horizontal mode
1 Ar connection – hose 4
2
O
2
connection – hose 3
3 Flame sensor connection (optional)
Multi-purpose
combustion tube
(optional)