Endress+Hauser Analytik Jena Multi X 2500 - Installing the Combustion Furnace

Transport and storage multi X 2500
118
10. Carefully lift the combustion furnace out of tilting mechanism
of the multi X 2500.
11.
Reinsert the front doors.
12.3.2 Installing the combustion furnace
WARNING
Danger of electric shock! Before installing the combustion f
urnace switch off the
multi
X 2500 using the mains switch and disconnect the mains plug from the power
outlet!
1. Make sure that the multi X 2500 is not connected to the mains.
2. Remove the top cover. Open the doors of the multi X 2500 and remove them from
the device.
3. Insert the combustion furnace horizontally into the
multi X 2500.
4. Tilt the combustion furnace into vertical position to access
the interfaces in the device interior.