Endress+Hauser Cerabar M PMC45 - Page 16

Installation Cerabar M HART
16 Endress+Hauser
3.3.3 Seal for flange mounting
P01-FMD7xxxx-11-xx-xx-xx-002
Fig. 13: Mounting the versions with flange or diaphragm seal
➀ Diaphragm
➁ Seal
#
Warning!
The seal is not allowed to press down on the diaphragm as this could affect the measurement result.
3.3.4 Wall and pipe-mounting (optional)
Endress+Hauser offers a mounting bracket for installing on pipes or walls for PMC41, PMP41,
PMP46 and PMP48. You can order the mounting brackets either via the order code or separately
as an accessory.
PMC41
• Order number: 919806-0000
• Material: AISI 304 (1.4301)
PMP41, PMP46 and PMP48
• Order number: 52001402
• Material: AISI 304 (1.4301)
P01-PMC41xxx-17-xx-xx-xx-000
Fig. 14: Wall and pipe-mounting PMC41
➁➀
159
125 (140)
20
94
3
162.2
115 (135)
176
60.3
81
111
29
6
106 (126)
70
179.2
115 (129)