Incoming acceptance and product identification Cerabar M PMC51, PMP51, PMP55
8 Endress+Hauser
3 Incoming acceptance and product identification
3.1 Incoming acceptance
A0016870
• Is the order code on the delivery note (1) identical to the order code on the product sticker
(2)?
• Are the goods undamaged?
• Do the data on the nameplate correspond to the order specifications and the delivery note?
• Is the documentation available?
• If required (see nameplate): Are the safety instructions (XA) present?
If one of these conditions is not fulfilled, please contact your Endress+Hauser sales office.
3.2 Product identification
The following options are available to identify the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
• Enter the serial numbers from the nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): all the information about the device is displayed.
For an overview of the technical documentation provided, enter the serial number from the
nameplates in W@M Device Viewer (www.endress.com/deviceviewer)
3.2.1 Manufacturer address
Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Place of manufacture: See nameplate.
3.3 Nameplate
See operating instructions.
To Next Page
Loading...
