Cerabar M PMC51, PMP51, PMP55 Incoming acceptance and product identification
Endress+Hauser 9
3.4 Identifying the sensor type
In the case of gauge pressure sensors, the "Pos. zero adjust" parameter appears in the
operating menu ("Setup" -> "Pos. zero adjust").
In the case of absolute pressure sensors, the "Calib. offset" parameter appears in the operating
menu ("Setup" -> "Calib. offset").
3.5 Storage and transport
3.5.1 Storage conditions
Use original packaging.
Store the measuring device in clean and dry conditions and protect from damage caused by
shocks (EN 837-2).
Storage temperature range
See the Technical Information for Cerabar M TI00436P.
3.5.2 Transporting the product to the measuring point
L
WARNING
Incorrect transport!
Housing and membrane may become damaged, and there is a risk of injury!
‣
Transport the measuring device to the measuring point in its original packaging or by the
process connection.
‣
Follow the safety instructions and transport conditions for devices weighing more than 18
kg (39.6 lbs).
‣
Do not use capillaries as a carrying aid for the diaphragm seals.
3.6 Scope of delivery
The scope of delivery comprises:
• Device
• Optional accessories
Accompanying documentation:
• Operating Instructions BA02136P is available on the Internet. See: www.de.endress.com →
Download
• Brief Operating Instructions: KA01522P Cerabar M
• Final inspection report
• Additional Safety Instructions for ATEX, IECEx and NEPSI devices
• Optional: factory calibration certificate, inspection certificates
To Next Page
Loading...
