Endress+Hauser Deltabar S PMD75 - Pressure Measurement (FF Configuration Program)

Deltabar S FOUNDATION Fieldbus Installation
Endress+Hauser 13
4 Installation
NOTICE
Incorrect handling!
Damage of the device!
‣ Disassembly of the screws with item number (1) is not permissible under any circumstances
and will result in loss of warranty.
A0025336
4.1 Incoming acceptance and storage
4.1.1 Incoming acceptance
• Check the packaging and the contents for damage.
• Check the shipment, make sure nothing is missing and that the scope of supply matches your
order.
4.1.2 Transport
WARNING
!
Incorrect transport
Housing and diaphragm may be damaged and and there is a risk of injury!
‣ Transport the measuring device to the measuring point in its original packaging or by the
process connection (with secure transport protection for the diaphragm).
‣ Follow the safety instructions and transport conditions for devices of more than 18 kg
(39.69 lbs).
‣ Do not use capillaries as a carrying aid for the diaphragm seals.
4.1.3 Storage
The device must be stored in a dry, clean area and protected against impact (EN 837-2).
Storage temperature range:
• –40 to +90°C (–40 to +194 °F)
• Onsite display: –40 to +85°C (–40 to +185°F)
• Separate housing: –40 to +60°C (–40 to +140°F)
1