Endress+Hauser iTEMP TMT142B - Certificates and approvals; Storage and transport

iTEMP TMT142B Incoming acceptance and product identification
Endress+Hauser 11
3.2.2 Name and address of manufacturer
Name of manufacturer: Endress+Hauser Wetzer GmbH + Co. KG
Address of manufacturer: Obere Wank 1, D-87484 Nesselwang or www.endress.com
3.3 Certificates and approvals
For certificates and approvals valid for the device: see the data on the nameplate
Approval-related data and documents: www.endress.com/deviceviewer → (enter the
serial number)
3.3.1 HART
®
protocol certification
The temperature transmitter is registered by the HART
®
Field Comm Group. The device
meets the requirements of the HART
®
Communication Protocol Specifications, Revision 7.
3.4 Storage and transport
Storage temperature
• Without display: –50 to +100 °C (–58 to +212 °F)
• With display: –40 to +80 °C (–40 to +176 °F)
• With overvoltage protection module: –40 to +85 °C (–40 to +185 °F)
Maximum relative humidity: < 95 % as per IEC 60068-2-30
Pack the device for storage and transportation in such a way that it is reliably
protected against impact and external influences. The original packaging offers the
best protection.
Avoid the following environmental influences during storage:
• Direct sunlight
• Proximity to hot objects
• Mechanical vibration
• Aggressive media