Accessories iTEMP TMT142B
44 Endress+Hauser
Item No. Order code Spare parts
- 51004387 Adapter for cable entry, NPT ½" / M20x1.5
- 51004915 Adapter M20x1.5 male/ M24x1.5 female VA
- SERVICE- Service
- XPRFID- RFID TAG as spare part only for devices with option L, RFID TAG
identification
Replaces RFID TAG consisting of: RFID TAG, fixing wire, crimping sleeve
11.3 Return
The requirements for safe device return can vary depending on the device type and
national legislation.
1. Refer to the web page for information:
http://www.endress.com/support/return-material
Select the region.
2. Return the device if repairs or a factory calibration are required, or if the wrong
device was ordered or delivered.
11.4 Disposal
If required by the Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), the product is marked with the depicted symbol in order to minimize the
disposal of WEEE as unsorted municipal waste. Do not dispose of products bearing this
marking as unsorted municipal waste. Instead, return them to the manufacturer for
disposal under the applicable conditions.
12 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Endress+Hauser sales center or on the product page of the
Endress+Hauser website: www.endress.com.
Always quote the serial number of the device when ordering accessories!
12.1 Device-specific accessories
Accessories Description
Dummy plug • M20x1.5 Ex-d
• G ½" Ex-d
• ½" NPT
Cable glands • M20x1.5
• NPT ½" D4-8.5, IP68
Adapter for cable gland M20x1.5 male/M24x1.5 female
Pipe mounting bracket For 2" pipe 316L
Overvoltage protection The module protects the electronics from overvoltage.
To Next Page
Loading...
