iTEMP TMT142B Repair
Endress+Hauser 43
Item No. 7 Housing
2 3 x M20x1.5 female thread + terminal block + 1 dummy plug
4 2x G ½" female thread + terminal block + 1 dummy plug
5 M20x1.5 + M24x1.5 + terminal block + 1 dummy plug
6 2x M20x1.5 female thread + terminal block + 1 dummy plug
Version:
A Standard
TMT142G- A ← order code
Item No. 5 Electronics
Certificate:
A Non-hazardous area, Ex d/XP
B Ex ia / IS, intrinsic safety
Sensor input; communication; operation
B 1x; HART7, FW03.01.z, DevRev03; HART configuration
C 1x; HART7, FW03.01.z, DevRev03; HART/Bluetooth (app) configuration
Configuration
A 50 Hz mains filter
Service
I6 Configured as per original order (quote serial number)
TMT142E- A ← order code
Item No. Order code Spare parts
3, 4 TMT142X-D1 Display HART7 + fitting kit + twist protection
3, 4 TMT142X-DC Display fitting kit + twist protection
1 TMT142X-HA Housing cover, blind, 316L Ex d, FM XP, CSA XP + seal
1 TMT142X-HB Housing cover, blind, 316L + seal
1 TMT142X-HC Housing cover cpl. for display, 316L, Ex d, FM XP, CSA XP + seal
1 TMT142X-HD Housing cover cpl. for display, 316L + seal
1 TMT142X-HH Housing cover, blind, aluminum Ex d, FM XP, + seal, CSA approval, only as
cover of connection compartment
1 TMT142X-HI Housing cover, blind, aluminum + seal
1 TMT142X-HK Housing cover cpl. for display, aluminum Ex d + seal
1 TMT142X-HL Housing cover cpl. for display, aluminum + seal
2 71439499 O-ring 88x3 HNBR 70° Shore PTFE coating
71158816 O-ring 88x3 EPDM70 PTFE anti-friction coating
3 71310423 Display fitting kit, field housing (3 pcs), pack = 3 pieces
6 51004948 Cover clamp spare part set: screw, disk, spring washer
8 51004949 Cable gland M20x1.5
8 51006845 Cable gland NPT ½" D4-8.5, IP68
9 51004489 Plug (dummy) M20x1.5 Ex-d / XP
9 51004490 Plug (dummy) NPT ½", 1.0718
9 51004916 Plug (dummy) G ½", Ex-d / XP
9 51006888 Plug (dummy) NPT ½" V4A
- 51007995 Stainless steel mounting bracket for pipes 1.5" to 3", 316L
To Next Page
Loading...
