iTEMP TMT142B Accessories
Endress+Hauser 45
12.2 Communication-specific accessories
Accessories Description
Commubox FXA195
HART
For intrinsically safe HART
®
communication with FieldCare via the USB interface.
For details, see Technical Information TI404F.
Commubox FXA291 Connects Endress+Hauser field devices with a CDI interface (= Endress+Hauser
Common Data Interface) and the USB port of a computer or laptop.
For details, see Technical Information TI405C.
WirelessHART adapter Is used for the wireless connection of field devices.
The WirelessHART
®
adapter can be easily integrated into field devices and existing
infrastructures, offers data protection and transmission safety and can be operated
in parallel with other wireless networks.
For details, see Operating Instructions BA061S
Field Xpert SMT70 Universal, high-performance tablet PC for device configuration
The tablet PC enables mobile plant asset management in hazardous and non-
hazardous areas. It is suitable for commissioning and maintenance staff to manage
field instruments with a digital communication interface and to record progress.
This tablet PC is designed as a comprehensive, all-in-one solution. With a pre-
installed driver library, it is an easy-to-use, touch-sensitive tool which can be used
to manage field instruments throughout their entire life cycle.
For details, see Technical Information TI01342S.
12.3 Service-specific accessories
Accessories Description
Applicator Software for selecting and sizing Endress+Hauser measuring devices:
• Calculation of all the necessary data for identifying the optimum measuring
device: e.g. pressure loss, accuracy or process connections.
• Graphic illustration of the calculation results
Administration, documentation and access to all project-related data and
parameters over the entire life cycle of a project.
Applicator is available:
Via the Internet: https://portal.endress.com/webapp/applicator
Accessories Description
Configurator Product Configurator - the tool for individual product configuration
• Up-to-the-minute configuration data
• Depending on the device: direct input of information specific to the measuring
point, such as the measuring range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output
format
• Ability to order directly in the Endress+Hauser Online Shop
The Product Configurator is available on the Endress+Hauser website:
www.endress.com-> Select your country -> Click "Products" -> Select the product
using the filters and search field -> Open product page -> The "Configure" button to
the right of the product image opens the Product Configurator.
DeviceCare SFE100 Configuration tool for devices via fieldbus protocols and Endress+Hauser service
protocols.
DeviceCare is the tool developed by Endress+Hauser for the configuration of
Endress+Hauser devices. All smart devices in a plant can be configured via a point-
to-point or point-to-bus connection. The user-friendly menus enable transparent
and intuitive access to the field devices.
For details, see Operating Instructions BA00027S
To Next Page
Loading...
