Endress+Hauser iTEMP TMT142B - Operating menu and parameter description

iTEMP TMT142B Operating menu and parameter description
Endress+Hauser 61
14 Operating menu and parameter description
The following tables list all the parameters in the "Guidance, Diagnostics, Application
and System" operating menus. The page number refers to where a description of the
parameter can be found.
Depending on the parameter configuration, not all submenus and parameters are
available in every device. Information on this can be found in the parameter
description under "Prerequisite".
This symbol indicates how to navigate to the parameter using operating tools (e.g.
FieldCare).
Guidance → Commissioning →

Commissioning wizard
Start
→  35
Guidance → Create documentation
1)
Save / restore
1)
Compare datasets
1)
Operating time temperature ranges
2)

Report creation in event of: Backup & reset, Reset, Parameter report
1) These parameters only appear in FDT/DTM-based operating tools, such as Endress+Hauser's FieldCare and DeviceCare
2) This parameter does not appear in the handheld devices
The information from the menu Diagnostics → Operating time temperature ranges → Sensor can be processed with the functions under
Guidance → Operating time temperature ranges. With the "Backup & reset" option, the parameters are saved in a separate memory with the
actual length of time the sensor was operated in the specific temperature range, and the current values in the menu Diagnostics → Operating
time temperature ranges → Sensor are reset. This function can be used following a sensor replacement, for example. The separate memory
always only contains the last saved data record. The "Reset" option irrevocably resets the current values in the menu Diagnostics → Operating
time temperature ranges → Sensor. If the "Create protocol" option is selected, a report is created with the data records for the current lengths of
time and the saved data record. This report is saved in PDF format.
Diagnostics → Actual diagnostics → Actual diagnostics 1 →  65
Last rectified diagnostic →  65
Time stamp →  65
Operating time →  65
Diagnostics → Diagnostic list → Actual diagnostics 1, 2, 3 →  65
Actual diag channel 1, 2, 3 →  66
Time stamp 1, 2, 3 →  65
Diagnostics → Event logbook → Previous diagnostics n →  66
Previous diag n channel →  67
Time stamp n →  66
Diagnostics → Simulation → Diagnostic event simulation →  67
Current output simulation →  68
Value current output →  68