Endress+Hauser iTEMP TMT142B - Page 71

iTEMP TMT142B Operating menu and parameter description
Endress+Hauser 71
Options • Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
• No effect (N)
Factory setting See the list of diagnostic events →  40
14.1.6 Submenu: Min/max values
Sensor min value
Navigation Diagnostics → Min/max values → Sensor min value
Description Displays the minimum temperature measured in the past at the sensor input (minimum
indicator).
Sensor max value
Navigation Diagnostics → Min/max values → Sensor max value
Description Displays the maximum temperature measured in the past at the sensor input (maximum
indicator).
Reset sensor min/max values
Navigation Diagnostics → Min/max values → Reset sensor min/max values
Description Resets the min/max values of the sensor to their default values.
User entry Clicking the Reset sensor min/max values button activates the reset function. As a result
of this action, the min/max values of the sensor only display the reset, temporary values.
Device temperature min value
Navigation Diagnostics → Min/max values → Device temperature min value
Description Displays the minimum electronics temperature measured in the past (minimum indicator).