Operating menu and parameter description iTEMP TMT142B
86 Endress+Hauser
Description Use this function to start password definition
User entry Activate the button
New password
Navigation System → User management → Define password → New password
Description Use this function to enter a password for the Maintenance user role to gain access to the
relevant functions.
Additional information If the factory setting is not changed, the device is set to the Maintenance user role. This
means that the device's configuration data are not write-protected and can be edited at all
times.
Once a password has been defined, devices can be switched to the Maintenance user role
if the correct password is entered in the Password parameter. A new password becomes
valid once it has been verified after being entered in the Confirm new password
parameter.
The password must contain a minimum of 4 and a maximum of 16 characters and
can consist of both letters and numbers. Leading and trailing spaces not used as part
of the password. If you lose your password, please contact the Endress+Hauser sales
organization.
User entry . . . . . . . . (enter the password)
Confirm new password
Navigation System → User management → Define password → Confirm new password
Description Use this function to confirm the new password that has been defined.
Additional information A new password becomes valid once it has been verified after being entered in the
Confirm new password parameter.
The password must contain a minimum of 4 and a maximum of 16 characters and
can consist of both letters and numbers. Leading and trailing spaces not used as part
of the password. If you lose your password, please contact the Endress+Hauser sales
organization.
User entry . . . . . . . . (enter the password)
Status password entry
Navigation System → User management → Define password → Status password entry
To Next Page
Loading...
