Endress+Hauser Levelflex M FMP41C - Page 80

Technical data Levelflex M FMP41C with HART/4...20 mA
80 Endress + Hauser
Dielectric constant • Rod and rope probe:
ε
r ≥ 1.6
10.1.6 Mechanical construction
Tolerance of probe length
Weight
Material • Housing:
– housing F12/T12: aluminium (AlSi10Mg), seawater-resistant, chromated, powder-coated
– housing F23: 316L, corrosion-resistant steel
• Sight window: glass
Rod probes
over 1 m / 3.2 ft 3 m / 9.8 ft 6 m / 20 ft
up to 1 m / 3.2 ft 3 m / 9.8 ft 6 m / 20 ft
admissible tolerance (mm / inch) - 5 / - 0.2 - 10 / - 0.4 - 20 / - 0.8 - 30 / - 1.2
Rope probes
over 1 m / 3.2 ft 3 m / 9.8 ft 6 m / 20 ft
up to 1 m / 3.2 ft 3 m / 9.8 ft 6 m / 20 ft
admissible tolerance (mm / inch) - 10 / - 0.4 - 20 / - 0.8 - 30 / - 1.2 - 40 / - 1.6
Levelflex M FMP41C
+ rod probe
FMP41C
+ rope probe
Weight for the F12
or T12 housing
approx. 3.5 kg
+
approx. 1.1 kg/
metre
Probe length
+
Flange weight
approx. 3.5 kg
+
approx. 0.5 kg/m
Probe length
+
Flange weight
Weight for the F23
housing
approx. 6.8 kg
+
approx. 1.1 kg/
metre
Probe length
+
Flange weight
approx. 6.8 kg
+
approx. 0.5 kg/m
Probe length
+
Flange weight