Endress+Hauser Levelflex M FMP45 - Page 70

Technical data Levelflex M FMP40 and FMP45
70
Dielectric constant • With coax, rod or rope probe in bypass or stilling well:
ε
r of the upper phase ≥ 1,4.
• Difference of DC between upper and lower phase: minimum 10.
• Total level constant
• minimum layer thickness ≥ 100 mm (> 3,8") for DC 2.
11.1.6 Mechanical construction
Weight
Levelflex M
FMP45
XT version (max. 280 °C) HT version (max. 400 °C)
Rod probe Rope probe Coax probe Rod probe Rope probe Coax probe
Weight with F12 or
T12 housing
approx. 8.5 kg
+
approx. 1.6 kg/m
Probe length
+
Flange weight
approx. 8.5 kg
+
approx. 0.1 kg/m
Probe length
+
Flange weight
approx. 8.5 kg
+
approx. 3.5 kg/m
Probe length
+
Flange weight
approx. 9.5 kg
+
approx. 1.6 kg/m
Probe length
+
Flange weight
approx. 9.5 kg
+
approx. 0.1 kg/m
Probe length
+
Flange weight
approx. 9.5 kg
+
approx. 3.5 kg/m
Probe length
+
Flange weight
Weight with F23
housing
approx. 12 kg
+
approx. 1.6 kg/m
Probe length
+
Flange weight
approx. 12 kg
+
approx. 0.1 kg/m
Probe length
+
Flange weight
approx. 12 kg
+
approx. 3.5 kg/m
Probe length
+
Flange weight
approx. 13 kg
+
approx. 1.6 kg/m
Probe length
+
Flange weight
approx. 13 kg
+
approx. 0.1 kg/m
Probe length
+
Flange weight
approx. 13 kg
+
approx. 3.5 kg/m
Probe length
+
Flange weight