Endress+Hauser Liquiline CM442R - Page 129

Liquiline CM442R/CM444R/CM448R Diagnostics and troubleshooting
Endress+Hauser 129
PROFIBUS DP
only with PROFIBUS DP option
Read only
•DPV0 state
Module status
Ethernet
only with Ethernet,
EtherNet/IP, Modbus TCP,
Modbus RS485 or PROFIBUS
DP option
Read only
•Enable
• Webserver
• Link settings
•DHCP
•IP-Address
•Netmask
• Gateway
• Service switch
• MAC-Address
• EtherNetIP Port 44818
• Modbus TCP Port 502
• Webserver TCP Port 80
Ethernet-specific information
Display depends on the fieldbus protocol used.
SD card Read only
•Total
•Free memory
Total memory and space available
System modules
Depends on the electronics
module available, e.g.:
Base
Read only
•Description
• Serial number
•Order code
• Hardware version
• Software version
This information is provided for every electronics
module available. Specify the serial numbers and order
codes when servicing, for example.
Sensors
Depends on the sensors
connected
Read only
•Description
• Serial number
•Order code
• Hardware version
• Software version
This information is provided for every sensor available.
Specify the serial numbers and order codes when
servicing, for example.
Save system information
Save to SD card File name assigned
automatically (includes a
time stamp)
The information is saved on the SD card in a "sysinfo"
subfolder. The csv file can be read and edited in MS
Excel for example.
1) Provided you give the manufacturer all the information about changes to the hardware.
Diagnostics/System information
Function Options Info