Diagnostics and troubleshooting Liquiline CM442R/CM444R/CM448R
130 Endress+Hauser
11.13.2 Sensor information
Select the channel you want from the list of channels.
Information in the following categories is displayed:
•Extreme values
Extreme conditions to which the sensor was previously exposed, e.g. min./max.
temperatures
2)
• Operating time
Operating time of the sensor under defined extreme conditions
• Calibration information
Calibration data of the last calibration
• Sensor specifications
Measuring range limits for main measured value and temperature
• General information
Sensor identification information
The specific data that are displayed depends on what sensor is connected.
11.14 Firmware history
2) Not available for all sensor types.
Date Version Changes to software Documentation: edition
03/2015 01.05.02 Extension
• Conductivity:
– New sensor: CLS82D
– Concentration always visible in measuring menus
– Expansion of concentration tables
•Oxygen:
– New sensor: COS81D
• SAC, nitrate, turbidity:
– Calibration settings adjusted
– Adjustable flash rate (expert function)
Improvement
• Menu corrections (functions, designations)
BA01225C/07/EN/03.15
BA00486C/07/EN/02.13
BA01245C/07/EN/02.15
To Next Page
Loading...
