Liquiline CM442R/CM444R/CM448R Accessories
Endress+Hauser 143
Oxymax COS61D
• Optical oxygen sensor for drinking water and industrial water measurement
• Measuring principle: quenching
• Memosens protocol
• Material: stainless steel 1.4571 (AISI 316Ti)
• Order as per product structure (→ online Configurator, www.endress.com/cos61d)
• Technical Information TI00387C/07/EN
Oxymax COS22D
• Sterilizable sensor for dissolved oxygen
• Order as per product structure (→ Online Configurator, www.endress.com/cos22d)
• Technical Information TI00446C/07/EN
Oxymax COS81D
• Sterilizable, optical sensor for dissolved oxygen
• Order as per product structure (→ Online Configurator, www.endress.com/cos81d)
• Technical Information TI01201C/07/EN
14.2.9 Chlorine sensors
CCS142D
• Membrane-covered amperometric sensor for free chlorine
•Memosens technology
• Measuring range 0.01 to 20 mg/l
• Order as per product structure (→ Online Configurator, www.endress.com/ccs142d)
• Technical Information TI00419C/07/EN
14.2.10 Ion-selective sensors
ISEmax CAS40D
• Ion-selective sensors
• Order as per product structure (→ Online Configurator, www.endress.com/cas40d)
• Technical Information TI00491C/07/EN
14.2.11 Turbidity sensors
Turbimax CUS51D
• For nephelometric turbidity and solids measurement in wastewater
• 4-beam alternating light method based on scattered light
• With Memosens protocol
• Order as per product structure (→ Online Configurator, www.endress.com/cus51d)
• Technical Information TI00461C/07/EN
To Next Page
Loading...
