Endress+Hauser Liquiline CM442R - Page 146

Accessories Liquiline CM442R/CM444R/CM448R
146 Endress+Hauser
14.3.2 Firmware and activation codes
SD card with Liquiline firmware
• Industrial Flash Drive, 1 GB
• Order No. 71127100
You must quote the serial number of your device when ordering the activation code.
Activation code for digital HART communication
• Order No. 71128428
Activation code for PROFIBUS DP
• Order No. 71135635
Activation code for Modbus RS485
• Order No. 71135636
Activation code for Modbus TCP (module 485)
• Order No. 71135637
Activation code for EtherNet/IP (module 485)
• Order No. 71219871
Activation code for Modbus TCP (module ETH)
• Order No. 71279813
Activation code for EtherNet/IP (module ETH)
• Order No. 71279830
Kit CM442R: Activation code for 2nd digital sensor input
• Order No. 71114663
Kit CM444R/CM448R: Upgrade code for 2 x 0/4 to 20 mA for BASE-E
• Order No. 71140891
Activation code for feedforward control
• Requires current input or fieldbus communication
• Order no. 71211288
Activation code for measuring range switch
• Requires current input or fieldbus communication
• Order no. 71211289
Activation code for ChemocleanPlus
• Requires relays or digital outputs or fieldbus communication and optional digital inputs
• Order No. 71239104